Waterco MultiCyclone Filter

£232.86£299.90

Compare

Description

The Waterco MultiCyclone Solids Remover is an innovative pre-filter device that is both capable of saving water and reducing filter maintenance.

The Waterco MultiCyclone filter will filter out up to 80% of the incoming waste from your koi pond.

The Waterco MultiCyclone filter works on the principal of centrifugal water filtration, with no moving parts and no filter media to clean or replace.

These ‘plug and Play’ mechanical filters will provide years of maintenance free service.

The Waterco MultiCyclone filter is best suited and designed as a pre-filter or from a skimmer unit, reducing the amount of fine particles before entering your filter.

The Waterco MultiCyclone Pre filters are pressure units and require the water to be pumped in to the unit.

How Does Waterco MultiCyclone Filter Work:

The incoming water from the base of the Waterco MultiCyclone filter is guided by a diverter plate so that it enters 16 multiple hydro cyclones tangentially, generating a strong centrifugal effect.

This spins the sediment out to the hydro cyclone’s wall and then spirals it down to the sediment sump, while the cleansed water spirals upwards towards the centre of the hydro cyclone where the water flow reverses and then spirals upwards through the outlet at the top of the device.

The accumulation of sediment can be visibly monitored through the Waterco MultiCyclone clear sediment sump.

The Waterco MultiCyclone filter is cleaned by simply opening the 25 mm purge valve. Only 15 litres of water is discharged to clean the Waterco Multi Cyclone filter of sediment.

Waterco MultiCyclone Centrifugal filtration:

  • Simple installation
  • Incoming water enters 16 hydro cyclones tangentially, generating a strong centrifugal effect.
  • The sediment is spun out to the hydro cyclone’s wall, and then spirals down to the sediment bowl.
  • The filtered water migrates towards the center of the hydro cyclone where the flow reverses and spirals upwards through the outlet.
  • Accumulation of sediment can be visibly monitored through the Waterco MultiCyclone clear sediment bowl.
  • No filter media to clean or replace
  • The Waterco MultiCyclone is easily cleaned by opening the valve.
  • Only 15 litres of water is discharged to cleanse the Waterco MultiCyclone.

Additional information

WeightN/A
Product

Multi Cyclone Solids Remover MC12 – 1.5 inch, Multi Cyclone Solids Remover MC16 – 2 inch

Reviews

There are no reviews yet.

Be the first to review “Waterco MultiCyclone Filter”