Ever weld Solvent Weld Glue




Ever Weld P-194 solvent cement clear heavy bodied for PVC pipe and fittings.

Medium set industrial quality.

Best gap filling properties.

Schedule 40 and 80 up 12″ diameter fittings.

Built in to cap sponge type applicator for quick surface cover of pipe and fittings.

Available in
120 ml
240 ml
500 ml


Cut pipe square, remove all burrs, dirt, grease and moisture.

Clean surfaces with plastic pipe cleaner below.


Check dry fit.

A tight interference fit is essential if quick pressurisation is required.

Working quickly, apply a full, even coat of cement to pipe, then a thin, even coat to inside of fitting.

Avoid excessive use of cement resulting in puddling.

While cement is wet, immediately push pipe and fitting together.

Hold joint for at least 30 seconds to avoid push out.

Allow a few minutes before applying pressure.

Full joint strength will be reached in 4 hours.

For temperatures below 5°C. allow a longer cure time.

Replace lid after use, store between 5°C and 20°C,.

Very fast cure, use in wet or dry conditions.

PVC cement for all classes and schedules of rigid and flexible pipe.

Specially formulated for applications where conditions are very wet or when quick pressurisation is desired.

Comes complete with brush attached to inside lid of can.

Additional information


500ml, 120ml, 240ml


There are no reviews yet.

Be the first to review “Ever weld Solvent Weld Glue”